Blowing Agent
This RA Blowing Agent is a high temperature blowing agent, white fine powder, soluble in dimethyl sulfoxide, dimethylamide, dimethyl acetamide, concentrated ammonia and liquid alkali. Insoluble in acetone, methyl chloride, ethylene glycol, isopropyl alcohol, petroleum ether, toluene and water.
Product Description
This RA Blowing Agent is a high temperature blowing agent, white fine powder, soluble in dimethyl sulfoxide, dimethylamide, dimethyl acetamide, concentrated ammonia and liquid alkali. Insoluble in acetone, methyl chloride, ethylene glycol, isopropyl alcohol, petroleum ether, toluene and water. Decomposition temperature in air is 230°C, decomposition temperature in plastic is 213-225°C. The gas output is 140-150ml/g. The gases emitted are mainly nitrogen and carbon dioxide. The solid residue after decomposition is mainly p-xylene disulfide and p-toluenesulfonic acid ammonium, the former soluble in benzene, the latter soluble in water, the RA Blowing Agent decomposition temperature is high, good stability, especially suitable for high temperature processing of plastics, for hard polyvinyl chloride, high-density polyethylene, ABS, natural rubber and other synthetic rubber plastic foam products.
As a professional blowing agent supplier, Shitong provides RA blowing agent for manufacturers that require high thermal stability, uniform cell formation and stable foam structure in plastic and rubber processing.
| Product Name | P-toluene Sulfonylurea RA |
| Appearance | White fine powder |
| Content | ≥98 % |
| Temperature Of Thermal Decomposition | 225-235°C |
| Gas Generation | 140-150ml/g |
| Moisture Content | ≤0.5 % |
| Average Grain Diameter | 8-10um |
| Ash Content | ≤0.5 % |
RA Blowing Agent is suitable for high-temperature processing systems. It can maintain good stability before decomposition and release gas effectively during the foaming stage.
With a gas generation range of 140–150 ml/g, RA Blowing Agent supports controlled foam formation and helps manufacturers achieve consistent product density and foam structure.
This product is especially suitable for hard PVC, high-density polyethylene, ABS and other materials that require higher processing temperatures.
The fine powder form and suitable particle size help improve dispersion in polymer formulations, supporting more uniform cell structure and stable foaming results.
RA Blowing Agent can also be used in natural rubber and synthetic rubber foam products where high-temperature processing and stable gas release are required.
RA Blowing Agent is suitable for rigid PVC foam applications where high processing temperature, stable decomposition and controlled foaming are required.
For high-density polyethylene foam products, RA Blowing Agent helps support stable gas release and uniform foam structure under high-temperature processing conditions.
RA Blowing Agent can be used in ABS foaming applications to help reduce weight, improve foam consistency and support stable product performance.
In natural rubber foaming systems, RA Blowing Agent helps create a cellular structure while maintaining stable processing performance.
RA Blowing Agent is suitable for synthetic rubber and rubber-plastic foam products that require high-temperature decomposition and stable foam formation.
OBSH Blowing Agent is often selected for low-odor rubber, plastic and synthetic leather foaming applications. It has a relatively lower decomposition temperature and is suitable for products requiring clean processing and fine cell formation.
RA Blowing Agent has a higher decomposition temperature and better high-temperature stability. It is more suitable for rigid PVC, HDPE, ABS, natural rubber and synthetic rubber products processed under higher temperature conditions.
AC or ADC Blowing Agent is commonly used for applications requiring high gas generation and fine cell formation. However, it may need careful control in some high-temperature or thick foaming products.
RA Blowing Agent is selected when higher thermal stability and controlled decomposition are required. It is suitable for high-temperature plastic and rubber systems where stable gas release and process reliability are important.
RA Blowing Agent is used for high-temperature plastic and rubber foaming applications, including rigid PVC, HDPE, ABS, natural rubber and synthetic rubber foam products.
Yes. RA Blowing Agent is especially suitable for rigid PVC foam products because it has high decomposition temperature, good stability and controlled gas release.
The gas generation of Shitong RA Blowing Agent is typically 140–150 ml/g.
RA Blowing Agent has a higher decomposition temperature and is more suitable for high-temperature plastic and rubber systems. OBSH Blowing Agent is often used for low-odor foaming applications such as rubber, plastic and synthetic leather products.
Yes. Shitong can recommend suitable blowing agent grades according to your material, processing temperature, foam density, product structure and final application.
Looking for a reliable RA Blowing Agent supplier for rigid PVC, HDPE, ABS or rubber foam products? Contact Shitong for product selection support, technical recommendations and customized rubber-plastic additive solutions.
